Menu

OTS100AF, OTS80AF and OTS60AF

Laboratory oil testers

  • Laboratory instruments for measuring insulating oil breakdown voltage
  • Lock in precision – oil vessel with lockable adjustment
  • Bright 3.5” colour display
  • Suitable for mineral, ester and silicon oils
  • Trip detection circuit with direct measurement of voltage and current
  • Ultra fast (< 10 µs) HV switch off time

Megger’s automatic laboratory oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids. Moulded test vessels give repeatable results with lock in precision electrode gap setting adjustment wheels. The transparent, shielded lid and large test chamber enable easy access to the test vessel.

All three laboratory models are fitted with a 12 key alphanumeric keypad to facilitate entry of test ID, filenames, notes etc. Alpha characters are entered by repetitive pressing on a key, the same way as text is entered modern cellular telephones.

Product Documents
Data sheet
Data sheet - OTS100AF
Quick start
Quick start guide - OTS series
User guide
User guide - OTS100AF, OTS80AF and OTS60AF
User guide
User guide - OTS series
OTS
OTS Test Standards

 

The attached file will update all the test standards of your OTS to the latest versions. Do not change the file name or it will not work. Please follow the instructions below:-

 

1. Extract the attached file (stdSeqs.db) to a USB memory stick

 

2. Insert the memory stick into the Type A USB port on the front panel of the OTS (or the Type A USB port on the rear of the OTS)

 

3. On the OTS, navigate to the Tools menu with the Hammer & Wrench symbol

 

4. Scroll down and select Manage test standards

 

5. On the next screen select Update Standards (USB) and the instrument will upload the new file from the USB stick.

 

6. The instrument will now have the latest standards installed ready to use.

OTS-Test-Standards-V0-10.zip
10.1 KB | 23/07/19